[<前月] [2004/05/10の内容を表示中] [次月>] [戻る]
2004/05/10 01:30:45 今日の一言: (( 日曜日 ))
rm -f /usr/X11R6/lib/X11/fonts/TrueType_*
cd /usr/X11R6/lib/X11/fonts/TrueType
ln -s /usr/share/fonts/truetype/*.tt? .
ln -s /usr/share/fonts/truetype/*/*.tt? .
ttmkfdir > fonts.scale; mkfontdir
vi /etc/X11/fs/config
catalogue セクションを編集
vi /etc/X11/XF86Config (XF86Config.4 みたいなファイルではなかった)
FontPath セクションを編集
Load "freetype" の追加はしないことにする
vi /etc/X11/XftConfig
特に編集箇所なし
vi /etc/gtk/gtkrc.ja
特に編集箇所なし
X を再起動すると…
failed to set default font path '/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11
R6/lib/X11/fonts/cyrillic:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr
/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/l
ib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/cyrill
ic,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib
/X11/fonts/TrueType'
Fatal server error:
could not open default font 'fixed'
vi /usr/X11R6/lib/X11/fonts/misc/fonts.alias
fixed への alias はちゃんとある
update-fonts-alias misc してみる
やっぱりダメ
仕方なく /etc/X11/XF86Config の FontPath セクションから TrueType のディレクトリ削除
Nautilus でのフォント選択には対象が現れるようになった
Mozilla ではダメ。Gnome のコントロールセンターでもダメ
cd ~/.nautilus
rm -f fonts
ln -s /usr/X11R6/lib/X11/fonts/TrueType fonts
Nautilus のタブの表示が全く出なくなった
元のように戻してみても、ダメ
それどころか、fonts を削除しても、元に戻らない
その代わり、fonts を削除したまま、「滑らかなフォント」に MS PR Gothic 以外を選んだら直った
TrueType を入れると fixed フォントがないと言われるだとかってな問題は過去にも出会して諦めた経験がある…。
その他 Locale のせい (UTF-8 から EUC への変換でアボートしてる) で Gnome が落ちる問題とかは、付き合ってられない。
そう言う訳で、一通りは何とかなったことだし、これ以上は時間の無駄なので、今日はこれで終わり……。
とか思いつつ、ついつい Kernel を 2.4 に上げてみる…;
# apt-get install kernel-image-2.4.18-686-smp
[..........]
[...snip...]
[..........]
You are attempting to install an initrd kernel image (version 2.4.18-686)
This will not work unless you have configured your boot loader to use
initrd. (An initrd image is a kernel image that expects to use an INITial
Ram Disk to mount a minimal root file system into RAM and use that for
booting).
As a reminder, in order to configure lilo, you need to
add an 'initrd=/initrd.img' to the image=/vmlinuz
stanza of your /etc/lilo.conf
I repeat, You need to configure your boot loader. If you have already done
so, and you wish to get rid of this message, please put
`do_initrd = Yes'
in /etc/kernel-img.conf. Note that this is optional, but if you do not,
you'll contitnue to see this message whenever you install a kernel
image using initrd.
Do you want to stop now? [Y/n]n
Setting up kernel-image-2.4.18-686 (2.4.18-5) ...
A new kernel image has been installed, and usually that means
that some action has to be taken to make sure that the new
kernel image is used next time the machine boots. Usually,
this entails running a ``bootloader'' like SILO, loadlin, LILO,
ELILO, QUIK, VMELILO, ZIPL, or booting from a floppy. (Some
boot loader, like grub, for example, do not need to be run on
each new image install, so please ignore this if you are using
such a boot loader).
A new kernel image has been installed. at /boot/vmlinuz-2.4.18-686
(Size: 618kB)
Initial rootdisk image: /boot//initrd.img-2.4.18-686 (Size: )
Symbolic links, unless otherwise specified, can be found in /
LILO sets up your system to boot Linux directly from your hard
disk, without the need for booting from a boot floppy.
WARNING
If you are keeping another operating system or another version
of Linux on a separate disk partition, you should not have LILO
install a boot block now. Wait until you read the LILO documentation.
That is because installing a boot block now might make the other
system un-bootable. If you only want to run this version of Linux,
go ahead and install the boot block here. If it does not work, you
can still boot this system from a boot floppy.
You already have a LILO configuration in /etc/lilo.conf
Install a boot block using the existing /etc/lilo.conf? [Yes] Yes
Testing lilo.conf ...
Testing successful.
Installing the partition boot sector...
Installation successful.
最初、マシンを勘違いして smp で install しちゃってリブートして…怖かった…。
やり直したら、聞かれる項目が激減してるし…。それか、smp でやっちゃった時に / 配下の System.map への symlink 削除
して貰ったり色々やって貰ったせいかも…。/initrd とかも、smp の時にやっちゃったからないだけなのかな…。
取り敢えず、/etc/lilo.conf に古いイメージのエントリを作成してから、image=/vmlinuz の設定に
'initrd=/initrd.img' の記述を追加し、lilo -v でブートセクタに書き込み。
色々調べて、どうももっと根本的な問題のようだということに気付く。
ifconfig -a で eth0 が出て来ない…。NIC が認識されなかった?
元の Kernel で dmesg した結果を grep eth0 すると、次のような結果が出ていた。
rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: RealTek RTL8139 Fast Ethernet at 0xd400, IRQ 10, 00:c0:f6:b2:34:1d.
/lib/modules/2.4.18-686/kernel/drivers/net には、8139cp.o と 8139too.o とがある。
でも、/lib/modules/2.2.17/net には、8139*.o は存在しない。その代わり、rtl8139.o がある!
なのに… 2.4.18-686 の方には、rtl* は存在しない…。
取り敢えず insmod 8139too とすると、Unresolved symbol になってしまう……。
「Realtek RTL8139C(8139too)カード導入」なんてのもあったけど…ここまではやりたくない。
いい加減、これ以上追及するのは時間の無駄。2.2 ならちゃんと使えるんだし、今日は終了。
関係ないけど、取り敢えずこんなのがあった:
dpkg-reconfigure xserver-xfree86
/usr/sbin/dpkg-reconfigure: xserver-xfree86 is not fully installed
dpkg-reconfigure locales
単に /etc/locale.gen が書かれるだけみたい
ハイパー・スレッド処理でLinuxを高速化
今のメインマシンなら、これがいけるのに
ニュース
・チェチェンで爆発、大統領ら死亡 対独戦勝記念式典で
これには驚いた………最悪な事件が起きた…
・国防総省が「尋問テクニック」の指針承認 米紙報道
・虐待は「占領開始当初から」 イラク前人権相が仏紙に
通常、トップが責任をとるべきことだろう? それに、それ相応の責任は取って取りすぎることがない位にあるのだから
・バグダッドの市場で爆発 イラク人7人死亡
・サドル師肖像画、米軍が撤去命令 拒めば拘束か
・サドル師派、米軍とバグダッドで衝突 アマラでは死者も
・サドル師派民兵、バスラなどで英軍と衝突
これだけの混乱と人の死をもたらした責任だって、ある筈なのだ。一体どういう神経をしているのだ
・イラクのスンニ派・シーア派、統一宗教者機関を結成
・国連職員組合、事務総長の非難決議採択 テロ責任問題
影響はどこまでも波及していく…
・女性の6割「飲める彼」希望 「失恋のやけ酒」は4割
こんなアンケートもあるんだなぁ
・全敗同士ウララ姉妹、8月に対決へ 馬券は全国発売方針
こういう売り方もあるんだなぁ
・キングカメハメハが圧勝 NHKマイルC
先日偶然気になった名前なんだけど…買っとけば良かったか(?
[<前月] [2004/05/10の内容を表示中] [次月>] [戻る]
|